How to glue the hard plastic firmly if it breaks?
In daily life, breakage of hard plastic products (such as toys, furniture, electrical appliance casings, etc.) is a common problem. How to glue hard plastic firmly has become the focus of many people's attention. This article combines the hot topics and hot content on the Internet in the past 10 days to provide you with detailed solutions.
1. Common methods for bonding hard plastics
According to the popularity of discussions across the Internet, the following are common methods for bonding hard plastics and a comparison of their advantages and disadvantages:
| method | Applicable plastic types | Advantages | Disadvantages |
|---|---|---|---|
| All purpose glue (cyanoacrylate) | ABS, PVC, acrylic | Fast curing, high bonding strength | Not resistant to high temperatures and brittle |
| Epoxy resin glue | most hard plastics | High strength and good temperature resistance | Long curing time and complex operation |
| UV glue | Transparent hard plastic | Transparent, traceless, fast curing | Requires UV irradiation |
| plastic welding | PE, PP and other difficult-to-stick plastics | permanent fix | Require professional tools |
2. Top 5 popular bonding techniques on the Internet
Based on the discussion on social media and forums in the past 10 days, the following most popular hard plastic bonding techniques have been sorted out:
| Ranking | Skills | heat index |
|---|---|---|
| 1 | Surface polishing + acetone cleaning + epoxy resin | ★★★★★ |
| 2 | Use plastic special glue + clamp to fix | ★★★★☆ |
| 3 | Hot melt glue gun temporary repair method | ★★★☆☆ |
| 4 | Plastic Welding Pen DIY Repair | ★★★☆☆ |
| 5 | Use 3D printing materials to fill gaps | ★★☆☆☆ |
3. Step-by-step bonding guide
Step 1: Clean the fracture
Use alcohol or acetone to clean the fracture surface thoroughly to remove oil and dust. This is a critical step to ensure bonding results.
Step 2: Surface treatment
For smooth plastic surfaces, it is recommended to lightly sand them with sandpaper (120-240 mesh) to increase the adhesion of the glue.
Step 3: Choose Glue
Choose the right glue according to the type of plastic:
- ABS/PS/PVC: universal glue or epoxy resin
- PE/PP: Special glue or plastic welding is required
- Transparent plastic: UV glue or optically clear glue
Step 4: Glue and fix
After evenly applying the glue, immediately align the fractures and apply appropriate pressure. It can be fixed for 24 hours using rubber bands, clamps and other tools.
Step 5: Post-processing
Check the bonding effect after curing. If there are burrs, they can be trimmed with a blade. If the strength is insufficient, consider adding reinforcement ribs or metal sheets for reinforcement.
4. Frequently Asked Questions
Q: Why does the glued plastic crack again?
A: Possible reasons: 1) Improper selection of glue; 2) Incomplete surface treatment; 3) Insufficient curing time; 4) Excessive force.
Q: What should I do if PE/PP plastic is particularly difficult to stick to?
A: Recommendations: 1) Use special glue for PP/PE; 2) Surface flame treatment; 3) Consider plastic welding.
Q: How to deal with white mist at the bonding area?
A: 1) Choose transparent traceless glue; 2) Control the amount of glue; 3) Polish after curing.
5. Safety precautions
1. Maintain ventilation during operation to avoid inhaling glue volatiles
2. Keep away from open flames, some glues are flammable
3. Wear gloves to avoid skin contact
4. Children should not come into contact with glue
Through the above methods, most hard plastic fracture problems can be effectively solved. If you encounter special plastics or important parts, it is recommended to consult professional maintenance personnel.
check the details
check the details
en
